Kitchen Painting in Denton, TX
Kitchen painting in Denton, TX: walls, ceilings and trim degreased, patched and painted in a scrubbable finish, planned so the kitchen stays usable.
Free estimates · Insured
Kitchen painting in Denton, TX refreshes walls, ceilings and trim that take grease, steam and daily scrubbing. Safe Choice Painting degreases the walls around the range, patches dents and old anchor holes, primes stains and paints in a satin or semi-gloss finish that wipes clean, working one side of the kitchen at a time so you can still cook.
What kitchen painting includes
- Walls around the range, sink, window and eating area
- The ceiling, which yellows faster in a kitchen than in most rooms
- Window, door and opening trim, plus baseboards
- Wall space between upper and lower runs and around the range hood
Countertops, tile backsplashes, appliances and floors are covered and left alone.
Kitchens from the 1990s
About 11 percent of Denton's housing was built in the 1990s, by Census estimates, so many kitchens in the city are around 30 years old and have been repainted at least once. If the walls carry a flat paint, they do not hold up to scrubbing, and wiping them often leaves shiny spots. Repainting in satin or semi-gloss fixes that, and a test patch tells us how the old coat will take new paint. If a past owner used an oil-based paint on the trim, we test it and use a bonding primer before the new coat.
Grease, steam and the range hood
Cooking leaves a thin grease film on the walls and ceiling near the range, and steam carries it farther than it looks. Paint will not bond to it. Every kitchen gets a degreasing wash on the walls and ceiling around the cooking area, a rinse, and time to dry before primer.
Ventilation plays a part. Denton builds to the 2021 International Residential Code, adopted by Ordinance 22-667 effective June 1, 2022, and that code's exhaust table sets kitchens at 100 cfm intermittent or 25 cfm continuous. A hood that is not pulling air leaves more grease and moisture behind. We point out one that does not seem to work; fixing it is a job for an HVAC or appliance contractor.
Stains and patches
- Water stains under the sink wall or around a window are sealed with a stain-blocking primer once the leak is fixed.
- Holes from old towel bars, hooks and backsplash anchors are filled and sanded flush.
- Cracks at corners and above doorways are taped and patched; bigger damage is covered on drywall repair in Denton.
Finish and color
Kitchen walls get satin or semi-gloss, and trim usually gets semi-gloss. The ceiling gets a flat or a washable ceiling paint. Our paint sheen guide explains the tradeoffs room by room. Light colors keep a kitchen bright and make the ceiling look higher; a contrast wall works well in an eating nook.
Keeping the kitchen usable
We agree with you which side of the room goes first. Counters on that side are cleared and covered, the range or sink on the other side stays in use, and at the end of each day the kitchen is put back so you can make dinner. Small items on counters are best put away before we start.
Open kitchens
When the kitchen opens to the family room, the wall color usually runs through both, so they are painted together; see living room painting in Denton. The general guide is kitchen painting.
Nearby
Common questions
What parts of the kitchen do you paint?
Walls, the ceiling, window and door trim, baseboards and the wall space around the range and sink. Countertops, backsplash tile and appliances are covered and left as they are.
Can I still use my kitchen while you paint?
Mostly. We work one side of the room at a time and keep the sink or the range clear at the end of each day so you can cook.
What paint finish is best for kitchen walls?
Satin or semi-gloss wipes clean better than flat. Our sheen guide covers each room.
Why does paint peel near the range?
Grease film keeps paint from bonding. We degrease those walls before priming.
Does my range hood vent affect the paint?
A hood that does not pull air leaves more grease and moisture on the walls. We point out vents that do not seem to work; repairs go to an HVAC or appliance contractor.
How to get an estimate
- 1
Tell us about the project
Call (903) 778-7777 or send the short form. Photos help but are optional.
- 2
Get a written estimate
We look at the job and send a written scope and price, including prep, repairs, materials and cleanup.
- 3
Schedule the work
Pick a start date that works for you. We confirm the plan before we begin.
Request an Estimate
Tell us which rooms you want painted and our team will contact you. Rather talk now?
Call (903) 778-7777See the towns we serve.